After this, click on Input and click on the USB Audio Codec and once it is checked, close down the System Preferences tab.
However, if you are unable to find a USB checkbox, select the “System Preferences” and click on Sound. 
Remember to check the dialogue box indicating USB Audio Codec once you enter the Audio Device section.
Once the above steps are completed, you can open your preferred DJ software and start the main settings tab. Apart from this, you should opt for the USB 3.0 since it will provide much higher transfer rates and one should only plug the device into his laptop’s own USB terminal. However, one thing which should be kept in mind while connecting the mixer to your laptop’s USB port is that you should never use any kind of USB Hub or Splitter. After the power management issue is solved, we will now need to connect the box-type terminal of our USB connection to the audio mixer and subsequently, the flat-ended terminal to the dedicated USB port on our laptop. In order to reduce and minimize any kind of signal distortions, it is advised to use any time of power manager. It is very important to understand that most of the audio mixers drive their power from your laptop and hence, it is very important that you keep your laptop batteries charged, or else, you may face an imminent power failure. Now, we will need to connect the audio mixer to a power source, depending upon the rating of the console. Firstly, we will have to acquire and assemble all the requisite cables, plugs and other hardware devices. So, let us first discuss the mixers which have a sound card installed with their hardware, such as the Numark NS7-2. You can watch this step by step video to solve this issue:įor iOS, most of the mixers have 2 methods of connecting to a laptop via a USB connection one with mixers having a sound card pre-installed within the hardware and second, a mixer without any sound card.
0 kommentar(er)
